FRHF Organic Ester Based

TORGS FR paints work in two ways as Fire retardant and Fire intumscent paint, it retards the fire/flame by releasing flame dampening gas and the paint gets charred & swell up when exposed to fire.

Fire Retardant paint (PFC) is known for its excellent heat properties. This range is used for electrical cables. Apart from this, provided range is quite vulnerable to fire incidents. It is suitable for external as well as internal usage. It proves to be very effective as it is used to protect the steel frame from fire. Fire Retardant paint (PFC) is designed for applying on wide variety of surface. It is helpful to prevent fire spreading rapidly.

It has the effect of creating an insulation coating, which protects any material from the heat generated by fire.

FR paints are suitable for interior and exterior use and can be applied on :

• Wood(all types of wood)
• Metal MDF or chip board ,
• Bricks or stone
• Concrete/ Plaster or plaster board

FIRE PAC is a clear, water based ready to use flame retardant.

We are involved in rendering a broad array of FIRE Retardant FIRE PAC. It is used to slow down or stop the spread of fire. This range is accomplished by chemical reactions that reduce the flammability of fuels. It aids to minimize smoke emission and delay the temperature rise. FIRE Retardant FIRE PAC is helpful to eliminate the risk of toxic smoke. It will slow down the combustion and prevent from any mishappening. It is used in schools, offices, houses etc. 

FIRE PAC may be applied to any natural fabric to provide flame spread control and suppress smoke generation in the event of fire.

USES IN CONSTRUCTION

• Officers
• Hospitals/ hotels

• Schools/ daycare centres
• Schools/ daycare centres
• Libraries/ houses
• Multlistorey buildings

ITEMS TO BE TREATED

• Wood / Wood products
• Paper / Currency
• Bamboo / care products
• Cotton jute

Flame Retardant FIRE  PAC

• Safe non toxic non hazardous
• Retards fire by limiting flame spread
• Easy to use brush, roll or spray

Diffusion Pump Oils (DP oil ) : VAC PAC ( Hydrocarbon Based )

• Colourless Transparent oily liquid.
• Excellent heat Stability.
• Very High Boiling Point.
• Extremely Low Volatility.
• Gives pressures down to 5*10-6 mm Hg
• Toxicity.
• Absolutely non-corrosive to most metals.
• (6.6*10-6 m bar).
• Very Low

USES & APPLICATIONS

• High Vacuum Diffusion Pumps.
• Metalizing Plants.
• For High Vacuum Pumps in Electronic Industry.

We are supported wisely by our expert team of chemical experts who make us the leading manufacturer and exporter of Antifreeze Coolant. Suitable for the purpose of heat transfer in automobiles, these chemicals ensure the long life of the vehicles. This type of coolant gives the capability to the automobiles for sustaining the extreme weather conditions. Formulated and processed in confirmation with the industry standards and norms, the offered Antifreeze Coolant is offered to clients in different  packings at cost effective prices.

Features :

• Low freezing point
• High boiling point
• Weatherproof

Note : This product is not to be used to protect the inside of potable water system against freezing.

KOOL - PAC is a single phase, Ethylene glycol type heavy duty engine coolant based on ‘PAC’ carboxylate corrosion inhibitor system. As per JIS-K 2234 class 1 and 2 & supersedes IS 5759-1994 AND ASTM D -6210.

PRODUCT APPLICATION:

KOOL – PAC is a heavy-duty engine coolant system which incorporates a carboxylate inhibitor technology. This is a nitrite, nitrate, borate, phosphate, silicate & amine free formulation which uses ‘PAC’ carboxylate technology to provide maximum protection of the six basic metal alloys found in most heat transfer system. Since the coolant contains no phosphate ester or silicates, hard water deposits in the cooling system are reduced. Water pump seal wear is reduced as a result of fewer abrasive dissolved solids in KOOL – PAC which results in improved water pump seal life.

KOOL –PAC is high performance anti freeze containing a carefully balanced mixture of corrosion inhibitor, protecting cooling systems of all types of water cooled internal combustion engines. It provides good corrosion protection whether the cooling system is of predominately aluminium or ferrous metal construction.

KOOL-PAC has extended life, versatile both in cooled climate as well as desert area.

Leveraging on our ich industry experience, we are reckoned among the trusted Manufacturers, Suppliers and Exporters of Phosphate Ester Fire Resistant Hydraulic Fluid. It only provides fire protection but also protects against corrosion. Bulk orders of the Hydraulic Fluid are processed by us as per the specific requirements of the buyers.

The offered Fire Resistance Hydraulic Fluid (PE) is fully synthetic Phosphate Ester based Fire resistant Hydraulic Fluid. Firesafe Fire Resistant Hydraulic Fluid (PE) provides fire resistant under severe operating condition. It offers well anti wear protection for high pressure and high output pumps. The fluids are most often associated with hydraulic systems. In some of these systems, components must operate at an extremely high temperature, which means people will want to use a fluid that does not ignite easily in the event of a leak. The offered Fire Resistance Hydraulic Fluid (PE) is very efficient and made for industrial use. 

Firesafe Fire Resistant Hydraulic Fluid (PE) is fully synthetic Phosphate Ester based Fire resistant Hydraulic Fluid. Firesafe Fire Resistant Hydraulic Fluid (PE) provides fire resistant under severe operating condition. It offers well anti wear protection for high pressure and high output pumps. Firesafe Fire Resistant Hydraulic Fluid (PE) protects against corrosion for both ferrous and non-ferrous metals. It has excellent thermal & oxidation stability. Firesafe Fire Resistant Hydraulic Fluid (PE) gives excellent lubricity under working condition & some times gives better result then other petrochemical’s oil. TINA ORGANICS (P) LTD. manufacturing this product in the brand name of Firesafe Fire Resistant Hydraulic Fluid (PE).

Firesafe Fire Resistant Hydraulic Fluid ( PE ) has excellent resistance to oxidation at normal working temperature, so it retains Viscosity throughout during its service life and gives a very good corrosion protection for longer period. It also avoids the excess water in system to easily separate out from it. It has a good anti foaming property.

Application : Firesafe Fire Resistant Hydraulic Fluid (PE )is recommended to use where

Metals are smelted or hot worked such as :

• Aluminum die casting machines.
• Tilting systems of cast Iron melting furnace.
• Steel industry.
• Aviation.

FIRESAFE HFDU 68 is designed for hydraulic equipments operating  in locations comprising a fire risk, such as iron and steelworks (coking plants, blast furnaces, continuous casting), mines, etc... The use of FIRESAFEHFDU 68 lessens the serious risks presented by recourse to a mineral oil on the occasion of rupture of a hose or when a leak gives rise to oil mist, in the immediate vicinity of a flame, a part in the process of melting or a switch cupboard.

FIRESAFE HFDU 68 is especially recommended when there is the possibility of contamination of waters : offshore, mines.

With its considerable fire resistance properties, and associated exceptional lubricating properties which guarantee a substantial reduction in wear and therefore a longer service life of the hydraulic components.

High flash point and high auto ignition temperature. Low pour-point providing good performances at low temperature.

Very high natural viscosity index, guaranteeing a viscosity constantly adapted to the temperature range in which the fluid must be used.

Very good anticorrosion properties in relation to ferrous and non-ferrous metals making up a hydraulic circuit.

Very good oxidation stability: enhanced service life. The product is not expected to produce adverse effects on health.